Job Description: The successful candidate must accurately build transformers and other assemblies to prints, drawings, work instructions, travelers or other method of instruction with supervision. Must verify usable condition of all tools; ensure equipment calibration is valid prior to use, and use calibrated measuring devices to check dimensions to confirm assembly meets drawings and prints. Must setup and assemble cores and/or steel lamination and insulating separators into wound coils using banding, stacking, interleaving, and other techniques as required. Must prepare wire connections by forming, sanding, scraping, tinning, insulating and/or other methods for connection to terminals or other points of contact and also prepare surfaces using silicones or other surface treatments, as indicated by documentation. Utilize solder irons, torches, epoxies, and/or tools (screwdrivers, wrenches, hammers, pliers, clamps, etc.) to form and make connections, fasten metal objects together, and assemble parts to form units or subassembly parts, or mounts subassemblies on panel or in cabinet. Clean and inspect terminal connections for flaws and correct as needed. Assemble wires to terminals, lugs, and/or terminal boards utilizing crimping tools and other tools as needed. Must assemble or dis-assemble electronic components, mechanical components, subassemblies, and/or systems and make mechanical adjustments to work, including unit rework, repair or modifications. Must have valid driver’s license. Must pass both Espey Fork Truck and Brazing Certification Training programs, and then obtain both Espey Fork Truck Certification and Brazing Certification within 90 days.
**Must be US Citizen**
If submitting resume via email, please send PDF documents only.